Feature:
Case diameter:50mm
Dial thickness: 16mm
Strap width: 22mm
Strap length:260mm (including case)
Strap material:Resin
Instructions for use:1.Watch
the normal display press M, press down to a stopwatch function, according to the 2 is the alarm settings, according to the 3 time calendar settings.
-When normal display time, press the S key to display the date, press the R button to display the alarm clock time.
3.12/24
hour status settings: normal display, press the M button 3 times, enter
the time adjustment status, and then press the R button 2 times into the hour to adjust the status, and then press the S button to adjust the
12/24 hour system. After setting up, then press M button to return to normal time for 1 times.
-Time
setting: when normal display, press M button 3 times to enter the time adjustment state. Seconds flashing, and then press the S key, proof seconds, press R button, sub flashing, press the S key to sub. The same method, press the R button to adjust the hour, date, month, week status,
after flashing in the S button adjustment, after all adjustments, in the M button 1 times, return to the normal display state.
-Alarm
settings: normal display state, press the M button 2 times to adjust the alarm status, and then press the S button to adjust the hour after adjustment, press the R button 1 times, then press the S button to adjust the minutes after setting, press the M button to return to normal
display state.
-Alarm
switch settings: press the R button does not put, press the S button, you can choose the alarm clock on / off, the alarm clock is opened with alarm symbols display. When the alarm clock rings, press S to stop for a
while, wait 4 or 5 minutes after the alarm again. If you press the R button, you will turn off the alarm clock directly.
-Set
the whole time setting: hold down the R key, press the M key, and select the full point timekeeping function to turn on / off. When the whole clock is turned on, the R key will be displayed all week.
-Stopwatch
method of use: in the normal display state press the M button 1 times to enter stopwatch function, then press the S button to start the stopwatch, press a S button, the stopwatch stopped, digital display. Press the R key to clear the number. Press the M button to return to normal display time.
-Button
light: press the L button, the lights will be lit. Note, the long-term use of lanterns on the battery consumption is relatively large. The battery model of this type of electronic meter is CR2032.
-Please tear off the screen protection film before use, otherwise it seems not clear.
-L=LIGHT M=MODE S=START R=RESET 12.A waterproof: this electronic watches for ordinary waterproof, can wash, splash and rain. But you can't take a bath, swim or dive, please wear it according to the scene.
Package Content:
1X Watch